ComOcta Abutment

– Cement/combination-retained prosthesis
– Fixture level impression
– Able to take abutment level impression using a retraction cap
– Use a 1.2 hex driver
– Recommended tightening torque : 30Ncm
– Packing unit : abutment + Ti screw

ComOcta Plus Abutment

– Cement / combination abutment for prosthesis manufacturing
– Used when the gingiva is thick or the fixture is deeply implanted
– Abutment – fixture interlock is 45platform contact
– Fixture level impression
– Use of 1.2 hex driver
– Recommended torque of tightening screw : 30Ncm
– Packing unit : abutment + Ti screw

ComOcta Gold Abutment

– Cement/combination/screw-retained prosthesis
– Customized prosthesis cast with gold alloy
– Abutment fastens to the platform at a 45angle
– Abutment melting point : 1400~1450C
– Fixture level impression
– Use a 1.2 hex driver
– Recommended tightening torque : 30Ncm
– Packing unit : abutment + Ti screw

ComOcta NP-Cast Abutment

– Cement/combination/screw-retained prosthesis
– Customized prosthesis cast with non-precious alloys
– Abutment fastens to the platform at a 45angle
– Abutment melting point : 1400~1450C
– Fixture level impression
– Use a 1.2 hex driver
– Recommended tightening torque : 30Ncm
– Packing unit : abutment + Ti screw

ComOcta Temporary Abutment

– Cement/screw-retained prosthesis
– A trim able provisional prosthesis (made of Ti Gr-3)
– Fixture level impression
– Use a 1.2 hex driver
– Recommended tightening torque : 20Ncm
– Packing unit : abutment + Ti screw

ComOcta Angled Abutment

– Cement/combination-retained prosthesis
– Angle compensation between 15/20
– Use dedicated abutment screw
– Fixture level impression
– Fastened using a 1.2 hex driver
– Recommended tightening torque: 30Ncm
– Packing unit : abutment + Ti screw(only angled)